Which calculator do I need?

Concrete and masonry calculators by job
JobCalculatorWhat you get
Pour a slab, footing, wall, column or stepsConcrete CalculatorCubic yards and cubic meters with waste
Buy bagged concrete for a small pourConcrete Bag CalculatorBags of 40, 50, 60 or 80 lb mix and their weight
Set fence or deck posts in concretePost Hole Concrete CalculatorBags per hole and for every post
Fill round tube forms for piersSonotube CalculatorYards and bags per tube and in total
Price ready-mix against bagsConcrete Cost CalculatorOrder size, short-load fee and cost per ft²
Reinforce a slabRebar CalculatorBars each way, stock lengths and weight
Lay a gravel base or drivewayGravel CalculatorTons and cubic yards of stone
Build a paver patio or walkwayPaver CalculatorPavers, base stone, sand and edging
Build a brick or block wallBrick CalculatorBricks or blocks and mortar bags

Planning a concrete job, in order

  1. Base. Most slabs and patios sit on compacted gravel. A 10 × 10 ft base 4 inches deep is about 1.8 tons of crushed stone; the Gravel Calculator works out any area.
  2. Volume. Measure the form and run the Concrete Calculator. It handles slabs, footings, walls, square and round columns, steps and round pads, and adds waste.
  3. Bags or truck. Up to about a cubic yard, bags are practical; the Concrete Bag Calculator gives the count for each bag size. For bigger pours, compare a ready-mix order with the Concrete Cost Calculator.
  4. Reinforcement. Lay out rebar or mesh before the pour. The Rebar Calculator counts bars each way and the stock lengths to buy.
  5. Posts and piers. Fence and deck posts set in holes use the Post Hole Concrete Calculator; piers poured in round cardboard forms use the Sonotube Calculator.
  6. Alternatives. A patio can be pavers instead of a slab (the Paver Calculator), and a wall can be brick or block (the Brick Calculator).

For the full method behind the numbers, with worked examples for every shape, read how to calculate concrete.

Quick reference

Bags of premixed concrete in one cubic yard
Bag size40 lb50 lb60 lb80 lb
Bags per yd³ (27 ft³)90726045

Based on the yields printed on common US bags: 40 lb 0.30 ft³, 50 lb 0.375 ft³, 60 lb 0.45 ft³, 80 lb 0.60 ft³. No waste added.

Concrete for 100 ft² (a 10 × 10 ft slab) by thickness
ThicknessNet volumeWith 10% waste80 lb bags60 lb bags
3.5 in1.08 yd³1.19 yd³5472
4 in1.23 yd³1.36 yd³6282
5 in1.54 yd³1.70 yd³77102
6 in1.85 yd³2.04 yd³92123

Bags include the 10% waste. Multiply by your area in hundreds of square feet for a quick estimate, then check it in the calculator.

A cubic yard of normal-weight concrete weighs about 4,000 lb, so a trailer load or a pickup bed fills up fast. The 62 bags for the 10 × 10 ft slab weigh 4,960 lb.

Bags or ready-mix

With example prices of $165 per yard, a $75 short-load fee under 5 yards and $6.50 per 80 lb bag, the 10 × 10 ft slab costs about $323 as ready-mix and $403 in bags. A 20 × 20 ft slab costs $908 as ready-mix and $1,593 in 245 bags. These are example prices only; enter local quotes in the Concrete Cost Calculator. The bigger limit on bags is labor: mixing and placing more than about a yard by hand is slow, and the first batches start to set before the last are placed.

Concrete, cement and mortar

  • Cement is the gray powder that binds everything. It is one ingredient, not something you pour on its own.
  • Concrete is cement, sand, gravel and water. It is what slabs, footings, posts and piers are made of, and what the concrete calculators measure.
  • Mortar is cement, sand and usually lime, with no gravel. It bonds brick and block, and the Brick Calculator counts it in bags.

Frequently asked questions

How many bags of concrete do I need for a 10 × 10 slab?

A 10 × 10 ft slab 4 inches thick needs 62 bags of 80 lb concrete or 82 bags of 60 lb, including 10% waste. That is 1.36 cubic yards, so many builders order ready-mix instead.

How many 80 lb bags of concrete make a yard?

45 bags of 80 lb concrete make one cubic yard at 0.60 ft³ per bag. It takes 60 bags of 60 lb or 90 bags of 40 lb. Add your waste allowance on top.

How many bags of concrete per fence post?

A 4 × 4 post in a 10-inch hole 30 inches deep, with 6 inches of gravel in the bottom, takes about 2.7 bags of 50 lb concrete. The Post Hole Concrete Calculator works out other hole and post sizes.

How much does a yard of concrete weigh?

About 4,000 lb. Normal-weight concrete is roughly 145 to 150 lb per cubic foot, and a cubic yard is 27 cubic feet. Lightweight mixes weigh less; ask the supplier for theirs.

Which calculator should I use for a patio?

For a poured patio, use the Concrete Calculator for the slab and the Gravel Calculator for the base. For a paver patio, the Paver Calculator counts the pavers, base stone, bedding sand and edging together.

The formula, worked example and tables on this page are generated from the same calculation engine as the calculator, which is checked by automated reference tests. Last reviewed 20 November 2026 by the Solosoft team. Results are planning estimates, not engineering or code approval. See the calculation disclaimer.