How to calculate square footage
- Measure the length and width of the space in feet, wall to wall at floor level, or at the surface you will cover.
- Convert any inches to decimal feet by dividing by 12: 12 ft 6 in becomes 12.5 ft and 10 ft 3 in becomes 10.25 ft.
- Multiply length by width: 12 × 10 = 120 ft².
- Split an irregular plan into rectangles, triangles and circles, find each area, then add the pieces and subtract any cut-outs.
- Convert the total if you need other units: divide by 9 for square yards, multiply by 0.0929 for square meters, divide by 43,560 for acres. 120 ft² is 13.33 yd² or 11.15 m².
rectangle = L × W · triangle = base × height ÷ 2 · circle = π × (diameter ÷ 2)²
With the calculator's other defaults, a triangle with a 10 ft base and 8 ft height is 10 × 8 ÷ 2 = 40 ft², and a circle 10 ft across is π × 5² = 78.54 ft². The height of a triangle is measured square to the base, not along the sloped side. The number of identical areas field multiplies one shape, so four 3 × 5 ft windows total 60 ft². Add a price per square foot to get a cost: 120 ft² at $4 is $480.
Square footage of common room sizes
| Room (W × L) | Square feet | Square yards | Square meters |
|---|---|---|---|
| 10 × 10 ft | 100 ft² | 11.11 yd² | 9.29 m² |
| 10 × 12 ft | 120 ft² | 13.33 yd² | 11.15 m² |
| 12 × 12 ft | 144 ft² | 16.00 yd² | 13.38 m² |
| 12 × 14 ft | 168 ft² | 18.67 yd² | 15.61 m² |
| 14 × 16 ft | 224 ft² | 24.89 yd² | 20.81 m² |
| 16 × 20 ft | 320 ft² | 35.56 yd² | 29.73 m² |
| 20 × 20 ft | 400 ft² | 44.44 yd² | 37.16 m² |
| 24 × 24 ft | 576 ft² | 64.00 yd² | 53.51 m² |
Floor area only. For walls, multiply the room perimeter by the wall height instead.
Square feet to acres for yards and lots
An acre is 43,560 ft², so divide square feet by 43,560 to get acres. A square acre is about 208.7 ft on each side, and a quarter-acre lot is 10,890 ft². The calculator shows acres for every result, which helps with sod, seed and fertilizer labels that list coverage per acre or per 1,000 ft².
| Area (W × L) | Square feet | Acres |
|---|---|---|
| 30 × 40 ft | 1,200 ft² | 0.028 |
| 50 × 100 ft | 5,000 ft² | 0.115 |
| 60 × 120 ft | 7,200 ft² | 0.165 |
| 100 × 100 ft | 10,000 ft² | 0.230 |
| 100 × 200 ft | 20,000 ft² | 0.459 |
| 208.71 × 208.71 ft | 43,560 ft² | 1.000 |
Irregular shapes: split into rectangles, triangles and circles
Few rooms are perfect rectangles. Sketch the floor, divide it into simple shapes that do not overlap, and run each one through the calculator. Add the pieces that belong to the room and subtract the ones that do not, such as a clipped corner or a stair opening.
| Piece | Shape | Calculation | Area |
|---|---|---|---|
| Main room | Rectangle | 16 × 12 | 192 ft² |
| Dining nook | Rectangle | 8 × 6 | + 48 ft² |
| Bay window, 6 ft across | Half circle | 28.27 ÷ 2 | + 14.14 ft² |
| Clipped corner | Triangle | 4 × 4 ÷ 2 | − 8 ft² |
| Total | 246.14 ft² |
A half circle is half the area of the full circle with the same diameter.
For a curved edge that is not a true circle, measure it as a few short straight segments and treat each as a rectangle or triangle. Small errors on one piece rarely matter once you add a waste allowance for materials.
Measuring in feet and inches
Tape measures read in feet and inches, but the area formula needs one unit. Convert inches to a decimal of a foot before multiplying: 12 ft 6 in × 10 ft 3 in is 12.5 × 10.25 = 128.13 ft². Multiplying 12.6 × 10.3 instead would be wrong, because 6 inches is half a foot, not six tenths. The feet and inches calculator does this conversion and adds fractions such as ⅜ inch.
If you measured in meters, multiply length by width to get square meters and divide by 0.09290304 to get square feet. That factor is exact, because the international foot is defined as 0.3048 meter.
Inside or outside the walls?
For flooring, paint and other materials, measure the inside of the room at the surface you will cover, and include closets and the floor under door openings if the material runs through them. A house's listed square footage is different. Many US appraisers follow ANSI Z765, which measures finished area from the outside of the exterior walls and leaves out garages and unfinished areas. That is why a listing usually shows more square feet than the sum of the rooms measured inside.
What this calculator does not include
- Waste: the result is net area. Flooring, tile, drywall and sod orders need extra for cuts. The material calculators add waste and turn area into sheets, gallons and tiles.
- Volume: for mulch, soil, gravel or fill, multiply the area by a depth with the cubic yard calculator. For slabs and footings use the concrete calculator.
- Sloped surfaces: a roof's area is larger than the floor plan it covers. Use the roofing calculator, which applies the pitch, and the siding calculator for walls, gables and openings.
Frequently asked questions
How many square feet is a 12 × 12 room?
A 12 × 12 ft room is 144 ft². That is 16 square yards or 13.38 square meters.
How do I calculate the square footage of an L-shaped room?
Split the L into two rectangles and add them. A 16 × 12 ft room with an 8 × 6 ft extension is 192 + 48 = 240 ft². Make sure the two rectangles do not overlap.
How many square feet are in an acre?
One acre is 43,560 ft². A quarter acre is 10,890 ft², and a square acre measures about 208.7 ft on each side.
How do I convert square feet to square yards?
Divide square feet by 9, because a square yard is 3 ft × 3 ft. 120 ft² is 13.33 yd². Check which unit a quote uses, because carpet is often priced per square yard.
How do I calculate square footage with feet and inches?
Convert inches to decimal feet first by dividing by 12, then multiply. 12 ft 6 in × 10 ft 3 in = 12.5 × 10.25 = 128.13 ft².
How do I find the square footage of a circle?
Halve the diameter to get the radius, square it and multiply by π (3.1416). A circle 10 ft across is π × 5 × 5 = 78.54 ft².
The formula, worked example and tables on this page are generated from the same calculation engine as the calculator, which is checked by automated reference tests. Last reviewed 20 November 2026 by the Solosoft team. Results are planning estimates, not engineering or code approval. See the calculation disclaimer.