How to calculate gravel
- Multiply length by width for the area: 30 × 12 = 360 ft². For a round area the calculator uses π × radius² when you pick the circle shape.
- Multiply by the depth in feet (inches ÷ 12): 360 × 4 ÷ 12 = 120 ft³. This is the net volume.
- Add the 10% allowance: 120 × 1.10 = 132 ft³.
- Divide by 27 to get cubic yards: 132 ÷ 27 = 4.89 yd³ (3.74 m³).
- Multiply by the weight per cubic yard and divide by 2,000 for US tons: 4.889 × 2,800 ÷ 2,000 = 6.84 tons (6.21 metric tonnes).
tons = length × width × (depth in ÷ 12) × (1 + allowance) ÷ 27 × lb per yd³ ÷ 2,000
The tons figure depends on the density more than on anything else you enter. The 2,800 lb/yd³ preset is a typical loose weight for gravel, not a measured one. Weight changes with stone size, shape and moisture, so ask your supplier what their material weighs per yard and enter it as a custom density if it differs.
Gravel per 100 square feet
Scale this table to any area: divide your square footage by 100 and multiply. The 30 × 12 ft example is 3.6 times the 4-inch row.
| Depth | Cubic yards | Tons | Cubic meters | 0.5 ft³ bags |
|---|---|---|---|---|
| 2 in | 0.68 yd³ | 0.95 tons | 0.52 m³ | 37 |
| 3 in | 1.02 yd³ | 1.43 tons | 0.78 m³ | 55 |
| 4 in | 1.36 yd³ | 1.90 tons | 1.04 m³ | 74 |
| 6 in | 2.04 yd³ | 2.85 tons | 1.56 m³ | 110 |
Gravel at 2,800 lb/yd³. 100 ft² is about 9.3 m².
Gravel for common projects
| Project | Size | Depth | Area | Cubic yards | Tons |
|---|---|---|---|---|---|
| Driveway | 10 × 50 ft | 4 in | 500 ft² | 6.79 yd³ | 9.51 tons |
| Garden path | 3 × 30 ft | 3 in | 90 ft² | 0.92 yd³ | 1.28 tons |
| Patio base | 12 × 12 ft | 6 in | 144 ft² | 2.93 yd³ | 4.11 tons |
| Fire-pit area | 10 ft round | 3 in | 78.5 ft² | 0.80 yd³ | 1.12 tons |
Gravel at 2,800 lb/yd³ with a 10% allowance. The fire-pit row uses the circle shape.
The driveway row is the big one: 9.51 tons for a single 10 × 50 ft strip at 4 inches. The calculator warns when an order passes 10 tons, which is more than many single-axle dump trucks carry, so ask the supplier how many loads it takes. The patio base row uses the gravel preset. In road base at 3,000 lb/yd³ the same base is 4.40 tons. For a paver patio, the paver calculator works out the base, the bedding sand and the pavers together.
Gravel depth by use
Depth changes the order in direct proportion: 6 inches takes 1.5 times as much as 4 inches. The depths below are common practice, not code requirements. Your supplier, your plans or a local contractor may set different depths for your soil and climate.
- Decorative beds: 2 to 3 inches is common. The calculator warns below 2 inches, because a thinner layer will not hide the soil or stay in place.
- Walking paths: 2 to 4 inches. Crushed stone with fines packs into a firmer surface than rounded pea gravel, which shifts underfoot.
- Driveways: deeper, and usually built in layers: a compacted base of larger crushed stone or road base, then a few inches of smaller surface stone. The right total depends on soil, drainage and traffic, so ask a local supplier or contractor. Run the calculator once per layer with that layer's material and depth, then add the tons.
- Bases for pavers, sheds and slabs: compacted road base or crushed stone, spread and compacted in layers. Take the depth from the paver maker's guide or your plans.
Compaction and why the allowance exists
Gravel is measured loose, as it sits in the truck. Once it is spread, raked, driven on or run over with a plate compactor, it settles and takes up less room. Uneven ground takes extra stone too. The allowance covers both.
For the 30 × 12 ft example, the net volume is 4.44 yd³ (6.22 tons). The default 10% allowance raises it to 4.89 yd³ (6.84 tons), and 20% raises it to 5.33 yd³ (7.47 tons). Use 10% for a raked decorative layer and 20% or more for a base you will compact. The paver calculator uses 20% for its compacted base.
Angular crushed stone and road base, which mix sizes down to fine dust, compact the most and lock together. Rounded pea gravel barely compacts but keeps spreading sideways, which is why it needs edging.
Choosing the stone
The presets are typical loose weights, the same 2,800 lb/yd³ gravel figure used on our material calculators page, so treat the tons as an estimate until you have the supplier's number.
| Material | Weight per yd³ | Tons per yd³ | Tons for 30 × 12 ft |
|---|---|---|---|
| Gravel | 2,800 lb | 1.4 | 6.84 tons |
| Crushed stone | 2,700 lb | 1.35 | 6.60 tons |
| Pea gravel | 2,600 lb | 1.3 | 6.36 tons |
| Road base / crusher run | 3,000 lb | 1.5 | 7.33 tons |
| Sand | 2,600 lb | 1.3 | 6.36 tons |
Loose weights with a 10% allowance. Real weights vary with stone size and moisture.
- Pea gravel: small rounded stone for beds, play areas and sitting areas. Comfortable to walk on but loose.
- Crushed stone: angular stone for paths, drainage and the top layer of a driveway. Washed stone without fines drains best.
- Road base or crusher run: crushed stone mixed with fines. It compacts hard and is the usual base under pavers and driveways.
Bags or bulk delivery
The calculator also counts 0.5 ft³ bags, the common size for bagged gravel and stone. One cubic yard is 54 of those bags. At 2,800 lb/yd³ each holds about 52 lb, so a ton is roughly 39 bags. The default 30 × 12 ft job comes to 264 bags, and the 10 ft fire-pit area at 3 inches to 44. The bag label gives the real weight.
Bags suit small jobs, top-ups and spots a truck cannot reach. For anything larger, compare the bagged price with the bulk price plus the delivery fee, and count the lifting. Ask the supplier about minimum loads and where the truck can dump.
Converting tons and cubic yards for a quote
Some suppliers sell by the ton, others by the cubic yard. The link between the two is the density: tons = yd³ × lb per yd³ ÷ 2,000, and yd³ = tons × 2,000 ÷ lb per yd³. At 2,800 lb/yd³, one cubic yard weighs 1.4 tons and one ton is 0.71 yd³. The example's 6.84 tons is 6.84 × 2,000 ÷ 2,800 = 4.89 yd³.
To compare a per-ton price with a per-yard price, multiply the per-ton price by 1.4. If the supplier uses a different weight per yard, use theirs, because it changes both numbers. Enter a price per ton or per yard in the calculator to see the cost. In metric, the example is 3.74 m³ or 6.21 tonnes. A metric tonne is 1,000 kg, about 2,205 lb, so a US ton is 0.91 tonne.
Weed barrier and edging
- Landscape fabric under a decorative bed or path keeps the stone from working down into the soil and slows weeds coming up from below. Seeds that blow in and root in the gravel still need pulling.
- Geotextile fabric under a driveway on soft or clay soil keeps the base stone from pressing into the mud, so less of it disappears over time.
- Edging of steel, aluminum, plastic, brick or stone keeps loose stone off the lawn. Pea gravel needs it most.
Related jobs
- Odd shapes: the calculator handles rectangles and circles. For an L-shape, run each rectangle and add the tons. For other shapes, find the area with the square footage calculator, then enter it as the length with a width of 1 ft.
- Soil, mulch and topsoil: these sell by the yard. The cubic yard calculator has coverage tables from 2 to 6 inches.
- A slab on gravel: the concrete calculator gives the yards and bags for the slab. Run this calculator for the stone under it.
- Fence and deck posts: the post hole concrete calculator accounts for a gravel layer at the bottom of each hole.
- Everything else in the job: bags, cost, rebar and brick are in our concrete and masonry calculators.
Frequently asked questions
How many tons of gravel do I need for a driveway?
A 10 × 50 ft driveway 4 inches deep needs about 9.51 tons of gravel (6.79 yd³) at 2,800 lb/yd³ with a 10% allowance. That covers one 4-inch layer. A new driveway on soft ground also needs a base layer, which you figure the same way with its own depth and material.
How much area does a ton of gravel cover?
With the 10% allowance, one ton of gravel covers about 53 ft² at 4 inches, 70 ft² at 3 inches and 105 ft² at 2 inches, at 2,800 lb/yd³. Lighter stone covers a little more per ton.
How many cubic yards are in a ton of gravel?
At 2,800 lb/yd³, one ton is 0.71 yd³ and one cubic yard is 1.4 tons. Pea gravel at 2,600 lb/yd³ gives 0.77 yd³ per ton, and road base at 3,000 lb/yd³ gives 0.67. Use your supplier's weight for an exact figure.
How many bags of gravel make a cubic yard?
A cubic yard is 27 ft³, so it takes 54 bags of 0.5 ft³. At 2,800 lb/yd³ each bag weighs about 52 lb and a ton is about 39 bags. Check the volume on the bag, because sizes vary.
How deep should a gravel path be?
A depth of 2 to 4 inches is common for a walking path. A 3 × 30 ft path at 3 inches takes 1.28 tons (0.92 yd³). Crushed stone with fines gives a firmer surface than pea gravel, and edging keeps either one in place.
How much extra gravel should I order?
Add 10% for a raked layer and 20% or more for a base you will compact. On the 30 × 12 ft example at 4 inches, that is 6.84 tons or 7.47 tons, against 6.22 tons with no allowance.
The formula, worked example and tables on this page are generated from the same calculation engine as the calculator, which is checked by automated reference tests. Last reviewed 20 November 2026 by the Solosoft team. Results are planning estimates, not engineering or code approval. See the calculation disclaimer.